Christian Jésus B. Fayomi
Christian Jésus B. Fayomi
Professeur
Domaines d'expertise
- Capteurs électroniques imprimés
- Capteurs sans fil
- Circuits électroniques
- Circuits électroniques flexibles
- Circuits électroniques imprimables
- Circuits microélectroniques
- Convertisseurs numériques-analogiques
- Génie électrique
- Génie électronique
- Génie informatique
- Génie microélectronique
- Microélectronique
- Microsystèmes
- Nano-systèmes
- Nanotechnologies
- Référence de tension
- Senseurs électroniques imprimés
- Traitement du signal
Cheminement académique
Christian J. B. Fayomi a terminé un baccalauréat en ingénierie à l'École Polytechnique de Thiès au Sénégal (spécialité électromécanique) avec la mention "Major de promotion." Il a aussi complété une Maîtrise en Sciences Appliquées en génie électrique l'École Polytechnique de Montréal, avec la mention spéciale du jury. M. Fayomi est également détenteur d'un doctorat en génie électrique (spécialité microélectronique) de l'École Polytechnique de Montréal. Sa thèse a été co-financée par l'Université McGill (Laboratoire MACS).
M. Fayomi a été ingénieur de conception de circuits microélectoniques mixtes chez Goal Semiconductors (Montréal) Canada où il a oeuvré dans la réalisation de divers types de circuits et systèmes microélectroniques analogiques/mixtes. Il a été également assistant de recherche au Microelectronics and Computer Laboratory (MACS - Lab) sous la direction du Professeur Gordon W. Roberts du département de génie électrique de l'Université McGill. M. Fayomi a aussi oeuvré dans la Division Microélectronique de IBM à Essex Junction au Vermont comme conseiller technique travaillant sur le développement de convertisseurs analogiques-numériques dédiés aux applications vidéos.
En juillet 2003, il rejoint le département d'informatique de l'Université du Québec à Montréal dans les programme de génie microélectronique et des systèmes informatique et électronique. Fayomi est également professeur associé au département de génie électrique et de génie informatique de l'Université du Québec à Trois-Rivières (UQTR). Ses intérêts de recherche portent sur la conception et la modélisation des circuits/systèmes microélectroniques analogiques/mixtes opérant à basse tension d'alimentation et dédiés aux applications biomédicales. M. Fayomi est membre de l'IEEE, del'IEICE (Japon), de l'IEEJ (Japon), de l'Ordre des Ingénieurs du Québec (OIQ) et du Regroupement Stratégique en Microélectronique du Québec (ResMIQ). M. Fayomi est actuellement le directeur du IEEE CASSFlexible, un organisme international dédié à la la promotion et à l'utilisation des systèmes électroniques imprimables. Les domaines d'application de ces derniers s'étant aux vêtements intelligents, l'automobile, l'agriculture intelligente, les maisons intelligentes, etc. pour ne citer que ceux-là
Unités de recherche
- Centre de recherche sur la conception et la fabrication de dispositifs microélectroniques et microsystèmes (CoFaMic)
- Regroupement stratégique en microsystèmes du Québec (ReSMIQ)
Projets de recherche en cours
-
Computer aided-design of microelectronic systems
Le but visé est de développer des outils informatiques dédiés à la conception automatique de systèmes microélectroniques. Plusieurs méthodes rigoureuses seront proposées.
-
Non-invasive blood glucose détection
L'objectif principal du projet est de détecter le niveau du glucose dans le sang en utilisant une approache non-invasive
-
Low-Cost Device for Fall Detection Systems
L'accent est mis sur la détection des chutes chez les personnes agées en utilisant des capteurs électronique flexibles et imprimés.
Affiliations externes principales
- Electronique pratique (2cr.) (2017, 2019, 2020)
- Signaux et systemes (2017, 2018, 2020, 2021, 2022)
- Projet integrateur i (1cr.) (2018, 2020, 2021)
- Electronique analogique et numerique (2020, 2021, 2022)
- Projet integrateur thematique (2020, 2022)
- Projet supervise (2020)
- Systemes embarques (2020, 2022)
- Introduction aux systemes embarques (2021)
- Analyse de circuits (2021, 2022)
- Projet integrateur 2 (1cr.) (2022)
SERVICES À L'EXTÉRIEUR DE L'UQAM
Membre du comité éditorial (voir comité de rédaction) de la revue:
Trends in Applied Sciences Research de Academic Journal Inc.
Membre du conseil d'administration du Regroupement Stratégique en Microélectronique du Québec.
Participation à la campagne de levée de fonds durant les 24 heures vélo Centraide Lanaudière.
Examinateur externe dans l'arbitrage d'articles soumis pour publications dans les journaux et comptes rendus de conférences suivants:
Journal of Analog Integrated Circuit and Signal Processing, Springer;
IEEE Transactions on Very Large Scale Integration Systems;
IEEE Transactions on Biomedical Circuits and Systems;
International Symposium on Circuits and Systems (IEEE-ISCAS);
International Test Conference (ITC);
Midwest Symposium on Circuit and Systems (IEEE-MWSCAS);
Northeast Workshop on Circuits and Systems (IEEE-NEWCAS).
IEEE Sensors Journal
Examinateur externe pour les deux volumes suivants:
Titre: CMOS Mixed-Signal Circuit design
Auteur: R. Jacob Baker
Éditeur: Wiley & Sons Inc, 2002.
Titre: An Introduction to Mixed-Signal IC Test and Measurement
Auteur: Mark Burns et Gordon W. Roberts
Éditeur: Oxford University Press, 2001.
SERVICES À L'INTÉRIEUR DE L'UQAM
Ancien coordonnateur de la section IEEE des étudiants en génie de l'UQAM.
Participation à la campagne de levée de fonds pour le financement du projet UQÀM-Nord des étudiants de cycles supérieurs de département de l'environnement.
Participation à la campagne de levée de fonds pour le financement du projet Sénégal 2006. Il s'agit d'un stage d'enseignement au Sénégal des étudiants en concentration Mathématiques du programme de baccalauréat en enseignement secondaire de l'UQAM.Ce stage est organisé en collaboration avec avec l'organisme non gouvernemental (ONG) Mer et Monde http://www.monde.ca/.
Participation à la campagne de levée de fonds pour le financement du stage Hors Québec https://unites.uqam.ca/sthqc/ des étudiants de l'UQÀM en éducation préscolaire.
Participation à la campagne de levée de fonds (deuxième édition) pour les 24 heures de vélo de Centraide Lanaudière du 25 et 26 Août 2007.
Directions de thèses et mémoires
- Djanou, Claudel Grégoire. (2008). Conception d'échantillonneurs-bloqueurs dans la technologie MOS submicronique. (Mémoire de maîtrise). Université du Québec à Montréal.
Publications
- Colombo, D., Fayomi, C., Nabki, F., Ferreira, L.F., Wirth, G. et Bampi, S. (2011). A design methodology using the inversion coefficient for low-voltage low-power CMOS voltage references. Journal of Integrated Circuits and Systems, 6(1), 7–17.
Obtenir "A design methodology using the inversion coefficient for low-voltage low-power CMOS voltage references" aux bibliothèques de l'UQAM
- Achigui, H.J., Fayomi, C., Massicotte, D. et Boukadoum, M. (2011). Low-voltage, high-speed CMOS analog latched voltage comparator using the flipped voltage follower as input stage. Microelectronics Journal, 42(5), 785–789. http://dx.doi.org/10.1016/j.mejo.2011.01.006.
- Fayomi, C.J.B., Wirth, G.I., Achigui, H.F. et Matsuzawa, A. (2010). Sub 1 v CMOS bandgap reference design techniques: A survey. Analog Integrated Circuits and Signal Processing, 62(2), 141–157. http://dx.doi.org/10.1007/s10470-009-9352-4.
- Achigui, H.F., Sawan, M. et Fayomi, C.J.B. (2008). A monolithic based NIRS front-end wireless sensor. Microelectronics Journal, 39(10), 1209–1217. http://dx.doi.org/10.1016/j.mejo.2008.01.055.
- Achigui, H.F., Sawan, M. et Fayomi, C.J.B. (2007). 1 v fully balanced differential amplifiers: Implementation and experimental results. Analog Integrated Circuits and Signal Processing, 53(1), 19–25. http://dx.doi.org/10.1007/s10470-006-9002-z.
- Achigui, H.F., Fayomi, C.J.B., Sawan, M. et PMC-Sierra. (2006). 1-V DTMOS-based class-AB operational amplifier: Implementation and experimental results. IEEE Journal of Solid-State Circuits, 41(11), 2440–2448. http://dx.doi.org/10.1109/JSSC.2006.883341.
- Fayomi, C.J.B., Sawan, M. et Roberts, G.W. (2006). Low-voltage analog switch in deep submicron CMOS: Design technique and experimental measurements. IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E89-A(4), 1076–1086. http://dx.doi.org/10.1093/ietfec/e89-a.4.1076.
- Zhang, E., Mawelo, R.M., Fayomi, C. et Nabki, F. (2013). A 0.9 v low-power reconfigurable successive approximation ADC for integrated sensors. Dans 2013 IEEE 11th International New Circuits and Systems Conference, NEWCAS 2013. http://dx.doi.org/10.1109/NEWCAS.2013.6573667.
- Colombo, D., Wirth, G., Bampi, S., Nabki, F. et Fayomi, C. (2012). Curvature correction method based on subthreshold currents for bandgap voltage references. Dans 2012 IEEE 3rd Latin American Symposium on Circuits and Systems, LASCAS 2012 – Conference Proceedings. http://dx.doi.org/10.1109/LASCAS.2012.6180314.
- Trabelsi, A., Boukadoum, M., Fayomi, C. et Aboulhamid, E.M. (2010). Blood glucose sensor implant using NIR spectroscopy: Preliminary design study. Dans Proceedings of the International Conference on Microelectronics, ICM. http://dx.doi.org/10.1109/ICM.2010.5696108.
- Colombo, D.M., Wirth, G.I. et Fayomi, C. (2010). Design methodology using inversion coefficient for low-voltage low-power CMOS voltage reference. Dans SBCCI'10 – Proceedings of the 23rd Symposium on Integrated Circuits and Systems Design. http://dx.doi.org/10.1145/1854153.1854166.
- Khamsehashari, E., Audet, Y. et Fayomi, C. (2010). Digital linearity correction of a wide dynamic range current-mode image sensor. Dans Proceedings of the 8th IEEE International NEWCAS Conference, NEWCAS2010. http://dx.doi.org/10.1109/NEWCAS.2010.5603722.
- Zebdi, M., Massicotte, D. et Fayomi, C.J.B. (2010). Low-power baseband folded Gilbert cell mixer for frequency-domain A/D converter in 0.18 μm CMOS. Dans 2nd International Conference on Advances in Satellite and Space Communications, SPACOMM 2010. http://dx.doi.org/10.1109/SPACOMM.2010.30.
- Fayomi, C., Wirth, G.I., Binkley, D. et Matsuzawa, A. (2009). An experimental 0.6-V 57.5-fJ/conversion-step 250-kS/s 8-bit rail-to-rail successive approximation ADC in 0.18μm CMOS. Dans 2009 16th IEEE International Conference on Electronics, Circuits and Systems, ICECS 2009. http://dx.doi.org/10.1109/ICECS.2009.5410973.
- Boukadoum, M., Trabelsi, A. et Fayomi, C. (2009). FPGA-based multispectral fluorometer using CDMA and embedded neural network. Dans Proceedings of the International Conference on Microelectronics, ICM. http://dx.doi.org/10.1109/ICM.2009.5418652.
- Zebdi, M., Massicotte, D. et Fayomi, C.J.B. (2009). Time-domain front-end for short time windowing UWB WLAN transform-domain receiver. Dans 2009 IEEE International Symposium on Radio-Frequency Integration Technology, RFIT 2009. http://dx.doi.org/10.1109/RFIT.2009.5383684.
- Fayomi, C.J.B., Wirth, G.I., Ramirez-Angulo, J. et Matsuzawa, A. (2008). "The flipped voltage follower"-based low voltage fully differential CMOS sample-and-hold circuit. Dans Proceedings – IEEE International Symposium on Circuits and Systems. http://dx.doi.org/10.1109/ISCAS.2008.4541768.
- Fayomi, C.J.B., Achigui, H.F., Wirth, G.I. et Kwasniewski, T. (2007). A 1-V fully differential sample-and-hold circuit using hybrid cascode compensated DTMOS-based folded OTA. Dans 2007 IEEE North-East Workshop on Circuits and Systems, NEWCAS 2007. http://dx.doi.org/10.1109/NEWCAS.2007.4487952.
- Colombo, D., Wirth, G., Bampi, S. et Fayomi, C. (2007). Impact of noise on trim circuits for Bandgap voltage references. Dans Proceedings of the IEEE International Conference on Electronics, Circuits, and Systems. http://dx.doi.org/10.1109/ICECS.2007.4511106.
- Wirth, G. et Fayomi, C. (2007). The bulk built in current sensor approach for single event transient detection. Dans 2007 International Symposium on System-on-Chip Proceedings, SOC. http://dx.doi.org/10.1109/ISSOC.2007.4427422.
- Fayomi, C.J.B. et Stratz, S.J. (2006). Novel approach to low-voltage low-power bandgap reference voltage in standard CMOS process. Dans Proceedings of the IEEE International Conference on Electronics, Circuits, and Systems. http://dx.doi.org/10.1109/ICECS.2006.379762.
- Achigui, H.F., Sawan, M. et Fayomi, C.J.B. (2005). A 1 V low power, low noise DTMOS based NIRS front-end receiver. Dans WMSCI 2005 – The 9th World Multi-Conference on Systemics, Cybernetics and Informatics, Proceedings, 6.
- Achigui, H.F., Fayomi, C.J.B. et Sawan, M. (2005). A 1 v low-power low-noise DTMOS based class AB opamp. Dans 3rd International IEEE Northeast Workshop on Circuits and Systems Conference, NEWCAS 2005, 2005. http://dx.doi.org/10.1109/NEWCAS.2005.1496678.
- Fayomi, C.J.B., Roberts, G.W. et Sawan, M. (2005). Low-voltage CMOS analog bootstrapped switch for sample-and-hold circuit: Design and chip characterization. Dans Proceedings – IEEE International Symposium on Circuits and Systems. http://dx.doi.org/10.1109/ISCAS.2005.1465058.
- Fayomi, C.J.B. et Roberts, G.W. (2004). Design and characterization of low-voltage analog switch without the need for clock boosting. Dans Midwest Symposium on Circuits and Systems, 3.
- Achigui, H.F., Fayomi, C.J.-B. et Sawan, M. (2003). A DTMOS-based 1 V opamp. Dans Proceedings of the IEEE International Conference on Electronics, Circuits, and Systems, 1. http://dx.doi.org/10.1109/ICECS.2003.1302024.
- Fayomi, C.J.B., Roberts, G.W. et Sawan, M. (2001). A 1-V, 10-bit rail-to-rail successive approximation analog-to-digital converter in standard 0.18μm CMOS technology. Dans Proceedings – IEEE International Symposium on Circuits and Systems, 1.
- Fayomi, C.J.B., Sawan, M. et Roberts, W. (2001). A design strategy for a 1-V rail-to-rail input / output CMOS opamp. Dans Proceedings – IEEE International Symposium on Circuits and Systems, 1.
- Fayomi, C.J.B., Roberts, G.W. et Sawan, M. (2000). Low power/low voltage high speed CMOS differential track and latch comparator with rail-to-rail input. Dans Proceedings – IEEE International Symposium on Circuits and Systems, 5.
- Fayomi, C.J.B., Roberts, G.W. et Sawan, M. (2000). Low-voltage CMOS analog switch for high precision sample-and-hold circuit. Dans Midwest Symposium on Circuits and Systems, 2.
- Zhu, J., Fayomi, C.J.B. et Sawan, M. (1995). New current-mode 2-bit pipelined ADC's cell. Dans Canadian Conference on Electrical and Computer Engineering, 1.
- Fayomi, C.J.B., Sawan, M. et Bennis, S. (1995). Parallel VLSI implementation of a new simplified architecture of Kalman filter. Dans Canadian Conference on Electrical and Computer Engineering, 1.